Wire Rope Cross Clamps

Wire rope cross clamps made of steel or stainless steel are very special clamps in the wide range of connecting and fastening elements. As there are different types of clamps today that can also securely clamp and fasten steel cables, we would like to dedicate this article exclusively to wire rope cross clamps. You have also set out to find the right cross clamps, anchor the crossing steel cables so firmly that they can be securely screwed together, but the connection should also be detachable again if the situation requires it. In this article we would like to give you all details about the construction of wire rope cross clamps made of stainless steel and steel as well as the materials used to make the wire rope cross clamps. We would also like to explain in which areas wire rope cross clamps made of stainless steel or steel are used and also our product range, in which we would like to give you a small overview of our stock of wire rope cross clamps. The last section of this article will deal with the mechanical production of these wire rope cross clamps and which machines are best suited for this purpose. However, we would like to start with the construction of wire rope cross clamps. As the name already promises, wire rope cross clamps are exclusively intended for screwing together crossing ropes in such a way that they can safely take up the load but are still releasably created. The basic body of such clamps is always round. In the middle there is a through hole with a corresponding tapped hole. The wire rope cross clamps are screwed into this hole, which later securely compresses the crossed steel cable. So that the steel cables can also be threaded easily into the wire rope cross clamps, there are two slots arranged opposite each other. At the same time as these slots, there are two further slots offset by 90 degrees in the base body of the stainless steel wire rope cross clamps. If the crossed rope pairs are now in the wire rope cross clamps, the stud screw can be screwed into the thread and tightened firmly. The front side of the stud now presses securely onto the steel cable pairs and presses them firmly and securely together. Wire rope cross clamps are not only used in industry, where rope connections have to be screwed tight, but also more and more often in private areas, where hobbyists hold their rope constructions together. As a rule, stainless steel V2A or V4A versions are always used as the material for wire rope cross clamps. So the steel ropes on boats and yachts can be connected super with one another without the wire rope cross clamps beginning to rust.

Especially in the field of industrial production, wire rope cross clamps made of stainless steel have become more and more popular and so the demand has risen drastically in recent years, because such connecting elements have strong benefits at a reasonable price. But due to the increased demand, the other online shops also have to stock up more and more of such wire rope cross clamps in order to safely cover the increasing demand. This is not always easy, because for this reason we have also decided to further expand our delivery program for wire rope cross clamps, so that we can offer our customers a large portfolio, so that their construction projects can be implemented quickly and cost-effectively with steel cables. We now offer our customers the opportunity to search for wire rope cross clamps made of stainless steel, the possibility to buy these connecting elements cheaply 24 hours a day through our online shop. So that such a purchase can run off also surely it is not indifferent to us, what happens with your data and thus we decided to convert the entire Domain on the safe SSL certificate. This creates even more security when purchasing your cross clamps from us and the other products you want to buy from us. All outgoing data is now protected by an encryption system to such an extent that data access by third parties is no longer possible. While we are at it, we would of course like to talk about an uncomplicated ordering process on our website, so that you know what an optimal ordering process should look like when buying wire rope cross clamps. Of course you have to know our website for the first time or find it to buy your goods from us. But if you read this text, you have surely come to us via the major search engines, because you have entered wire rope cross clamps, or wire rope cross clamps made of stainless steel. Then we were surely suggested to you. If so, you are already in the right wire rope cross clamps section. You can now take your time to look at all our products and, if necessary, quickly add the right items to your shopping basket in the quantity you require. Then you can either buy more products or pay for your cross clips and check them out. Then create a login and create an account. In this account, please enter your delivery address and your mail. We need this information to deliver the purchased wire rope cross clamps to your home. Now go back to the shopping cart and follow the instructions. After a few further clicks you will be shown the payment option. You choose the correct payment method that suits you and pay now the wire rope cross clamps. If the process was successful, you will receive a mail with all purchase details. Now we can process your order and prepare and send you the wire rope cross clamps made of stainless steel or steel.

The last section deals with the production of wire rope cross clamps made of stainless steel. Here we would like to give you some insights, so that you also understand the production process and know how such fastening elements can be manufactured today on modern machines. Basically, wire rope cross clamps are made of stainless steel or metal and have a round shape. For this reason, machining can only be carried out on a lathe. This means that it is a lathe equipped with a CNC module. The workpiece is clamped and turned by a turning tool until the contour is correct. As a rule, a loader is always connected to the lathe for economic reasons. This communicates with the CNC lathe and provides the raw material for the work cycles for the production of the wire rope cross clamps. In order to start the production of the wire rope cross clamps, it is necessary to set up the machine. And also the loading of all program parameters. Once all these operations have been completed, production can begin. Now first the tapped hole is drawn into the material, then the 4 recesses are made in the future wire rope cross clamps with a disc cutter, which later take up the crossed ropes and are clamped with the stud bolt. Once the cut-outs have been made and the wire rope cross clamps made of stainless steel is ready to take shape. In the last section the chamfers are attached and the round material is cut off. This process is repeated as often as wire rope cross clamps are needed. Once enough clamps have landed in the collection container, they can all be provided with the studs and packed in units in the warehouse. These finished wire rope cross clamps are now stored and wait for dispatch when you have received your online order. We can then pack them and ship them to you. After a few days by the shipping company, the freshly produced stainless steel wire rope cross clamps should arrive at your premises and you can now process them.